Montech Titan PLA 1200W ATX v3.1 PSU Review

Epilogue

The Montech Titan PLA 1200W achieves high efficiency, especially at light loads, and has a relatively loose fan speed profile, but its overall performance doesn’t stand out from the crowd. The Montech Titan Gold, using a Channel Well platform, achieves a notably higher overall performance. However, it costs less and belongs to a lower model family in Montech’s portfolio of products. This isn’t clear for potential buyers, who might think they will get more for their money by choosing the 1200 PLA model instead of the Titan Gold with a similar capacity. I should also note here that this unit barely passed the ATX v3.1 transient response tests since, at the 200% load test, its 3.3V rail dropped right at the limit. Having a borderline pass is not good. Moreover, the APFC converter needs tuning for higher PF readings because, as it is, it cancels the platform’s high efficiency since energy goes wasted back to the grid. The load regulation should be generally tighter, and the 12V rail’s transient response with the start point at lighter loads needs to be improved. The protection features also need some tuning to protect the PSU effectively. Lastly, the absence of fan failure protection is something that I will highlight on all high-end platforms from now on to “persuade” brands and manufacturers to include it in all of their designs at some point. It might affect the production cost (not so much), but there should be no compromise regarding protection features.

Although the fan speed profile is relaxed overall, I noticed that a high load on the minor rails (>=95W) will force the fan to spin and be within the 25-30 dBA noise range, even with a minor load at 12V.

The Titan PLA 1200W is a decent-performing PSU, which, however, is outclassed by other less expensive models, including one belonging to the brand’s family. The NZXT C1200 is also an excellent choice, especially at 200 dollars. I know that NZXT lost some of its charm recently, but the the fact is that its PSU department doesn’t have anything to do with the rest, and at the end of the day, you shouldn’t let anything prevent you from selecting the best products for your money.

Before investing in a new power supply, read my Best ATX v3.x PSUs article to check all alternative PSU offerings. You help me a lot by using my affiliate links, which don’t increase the product’s price. I get a commission from Amazon every time you do it, which can make a difference for me, especially now that I am on my own, working exclusively for my media and not for someone else.

 

 

Pros:
  • Delivered full power at 47°C
  • High build quality
  • ATX v3.1 and PCIe CEM 5.1 compliant
  • Low enough average noise output
  • Efficient (especially at light loads)
  • Efficient 5VSB rail
  • Within 1% load regulation at 5V
  • Good ripple suppression
  • Good transient response at 12V at high loads (ATX v3.1)
  • Increased hold-up time
  • Higher than 70% efficiency with a 2% load
  • Alternative Low Power Mode (ALPM) compatible
  • 12+4-pin PCIe connector set at 600W
  • Quality (FDB) fan
  • Adequate distance between the peripheral connectors
Cons:
  • Not competitive performance
  • The protection features need adjustments
  • Low-performance APFC converter
  • Increased inrush currents
  • >95W @ minor rails make the fan spin fast, even with a minor load at 12V
  • 3.3V rails barely passed the high-power ATX v3.x transient response tests
  • Increased vampire power
  • No fan failure protection
Pages ( 11 of 11 ): « Previous12345678910 11

Related Posts

10 thoughts on “Montech Titan PLA 1200W ATX v3.1 PSU Review

  1. Would you consider reviewing some of the sama psus like black diamond, black hole, XP, and even the new upcoming GT series? When they’re in stock they’re at incredible prices, and my buddy who’s working on a psu database says some of their electrical performance is debatably a tier.

  2. Are there any notable safety concerns when using this as compared to a better reviewed 1200W-1300W PSU with a MSI RTX 5090 SUPRIM SOC?

    I already purchased this PSU (felt it was good as it is a Seasonic OEM and there are also very few white PSUs at >1200W)

    However I am now concerned after reading the cons listed in this review, and might switch to the [ASRock Taichi TC-1300T] or [Lian Li Edge Gold/Plat 1200W/1300W] if it would improve safety levels

    1. Look at the protection features table, everything you need to know is on this page.

      I liked the Taichi units, FSP is trying hard to make them highly competitive.

Leave a Reply

Your email address will not be published. Required fields are marked *

OSZAR »